Boost Your Wifi Signal and Speed with Wifi Blueway N9200 Driver
so, if you are using tp-link archer t4u v3, you need to get it from belkin page. the best step to use the lwip driver is to replace the old one first and then install the new driver.the problem is this driver is not compatible with the current firmware and the wifi dongle isn't working properly. if you already try, remove the old firmware and use the old firmware again.if you are using tp-link archer t4u v3, you need to get it from belkin page.
Wifi Blueway N9200 Driver Downlo
i am using tp-link archer t4u(v3 ac1300) as wireless adapter with realtek-rtl88x2bu as the driver. it works fine in monitor mode and packet injection but unable to connect with any access point though the passphrase wasn't wrong. initially, i installed realtek-rtl88xxau driver for archert4u adapter but that didn't work theni tried withrealtek-rtl88x2bu driver which worked fine in all case except the wireless connection.
this agreement is not intended to and does not: (i) change or exclude any statutory consumer rights that cannot be lawfully changed or excluded; or (ii) limit or exclude any right you have against the person who sold the product to you if that person has breached any sales contract with you. you agree to use the software in compliance with all applicable laws, including local laws of the country or region in which you live or in which you download or use the software.
i bought the tp-link archer t4u v3 suggested from this blog and was assuming that the adapter will hold realtek-rtl8812au as its chipset. but unfortunately, the adapter doesn't i think. different blog suggests different things. now, i am totally confused about what chipset the adapter belongs, what is its proper driver for kali. dothis chipset this adapter really supports monitor mode & packet injectionbecause airmon-ng & iw commands fail to put the adapter in monitor mode saying operation not permitted. but withiwconfig the adapter can be put into monitor mode and work well with airodump-ng though iw dev shows that the adapter is still is managed mode. again airgeddon tells the adapter does not support monitor mode.
https://www.cammagic.org/group/cam-group/discussion/11818b4d-0fa0-4422-bf9f-7a5ab0edd9d5